FINAL SALE – this item is not eligible for returns or exchanges.
ABOUT 511 SEAL & ENHANCE
511 Seal & Enhance Is a unique, solvent-base formula designed to eliminate the need to use an impregnator before using a color enhancer for maximum stain protection and superior color enhancement. 511 Seal & Enhance is safe for use on granite, marble, limestone, natural stone, slate, ceramic tile, quarry tile and grout surfaces.
511 Seal & Enhance will enhance the color and rejuvenate the appearance of tumbled, honed, acid-washed, sandblasted, flamed, textured, even polished stone and tile surfaces. In addition, 511 Seal & Enhance revitalizes old and worn stone and tile installations. It can be used successfully in both interior and exterior environments and is freeze/thaw resistant.
READY TO USE SOLVENT BASE IMPREGNATOR/COLOR ENHANCE FOR:
- Granite
- Limestone
- Marble
- Ceramic Tile
- Polished Stone
- Natural Stone
- Quarry Tile
- Slate
- Grout
- not for Concrete/Masonry
SPECIAL FEATURES:
- Superior Stain Protection
- Interior/Exterior
- One Step
- Oil Resistant
- Water Repellent
- Will not Yellow
- Enhances Color
- Grout Release
- Easy-to-Use
- Lasts 3 – 5 Years
- Good for Floors
How to Apply Sealer:
Step 1:
Wipe down the surface to ensure that it is free from dirt and debris. Protect neighboring surfaces such as carpet and wood floors.
Step 2:
Pour the Sealant into an applicator tray and begin applying using the foam applicator. Apply only enough sealant to wet the surface, do not over-apply. Allow the sealer to stand for 3-5 minutes for maximum penetration.
Step 3:
Remove all excess sealer with a clean white towel or microfiber towel. Test an area with a few drops of water. If the water absorbs into the material; repeat step 2 after allowing it to dry for 2 hours. If the water does not absorb, the area is ready for foot traffic after 2 hours. The finished area must be kept dry and free of staining materials for 72 hours.